Home Theater Systems

10 tips for better home theater sound

Finally you are done setting a great home theater system but until unless to take time to properly set up the components, they are not going to perform to the best of their abilities. Listed here is a checklist to help you enhance the sound system of your home theater system to the fullest.

Navigate the speaker setup menus

Each 5.1/6.1 Audio video receiver holds a set up menu, but if not explored the option, you sound can probably be wonky. The step to rectify is quiet easy. For the right and left speakers, choose from the three speaker size – large, small and none. In general, speakers systems of 6 inch or larger woofers are conceived large. Using a tapeline, input the entire pair of speaker to listener distances. The receiver later will make the sound reach your ears precisely at the same period.

Few receivers may demand users to input required information. Under such cases, be sure that each speakers are in equal level. The test tone sent to the speaker will help the user to align the proportional volume of each channel. Make sure when the sound leaps from speaker to speaker, the loudness stays the same.

But a sound level meter

To ensure more accurate level of sound matching, go for RadioShack Model 33-2050 which functions excellent and is fairy priced.

Place interconnect cables and speakers at the correct position

With maze of cables brooding behind A/V receiver, it is all very easy to mix up with one another. While working with speaker level adjustment, double check the test tones whether they come out properly from the proposed speakers.

Fine-tune cross over controls and sub-woofer level

The brass department doesn't stop with just test tones and meters. Lower the level control of the sub brass incase it is thick, boomy and uneven. Set the crossover control to high or midpoint, if your satellites are very tiny. Huge speaker's at their own, tend to produce sound with more bass., hence they make more sense when the crossover sub knobs are placed at the bottom or near its range. Ultimately, proceeding the sub out of the corner and nearer to one of the front speakers may give out flatter, smoother bass.

Purchase speaker stands or brackets

Instead of placing speakers on the top of the cabinets or in the bookcases, place them on wall brackets or floor stands to considerably improve the sound quality.

Change the location of the speakers

In case you don't prefer stands or supports, remember it is essential to position the front speakers close to the ear level. The speaker corresponding to left and right,should be placed at equal distance form the position of listening. Speakers placed within 18 inches in a room's corner must be incline far from the corner, towards the main listening point.

Tame uncooperative acoustics

Rooms with exposed wood, lot of windows, tile floors or mirrors invariably looks over bright and lively. A dense carpet, a window mantles will absorb the hardness to a bit.

Upgrade speaker interconnect cable

Still using the scraggy wires? Switching to higher end cables can induce a exemplary betterment to the sound.

Add a separate power amplifier

In larger rooms, lifting up the volume may need more power. Peep into the back panel or the user manual to search for the preamp-out jacks for channels viz left, right, center, left surround and right surround. If the receiver is packed full, attach a separate amplifier of 100 or 150 or 200 watt per channel for the good times to roll.

Buy matched speakers

Matched speaker can give you more enhanced sound experience. Even a reasonably priced speaker will offer more stickier sound.